Start new topic. Recommended Posts. Posted October 11, Link to comment Share on other sites More sharing options Depends on when it was made. In the 90's they were made of poplar. I think they grind up Gibsons and make pressed sawdust bodies. DaleH Posted October 11, Or just what ever is left in the parts barrel when the kid slaps one togther. While replacing parts on a MIM Fender is always a viable option, potential modders should proceed with caution as many of the models use a mix of US parts and overseas parts.
The newer, non-MIM Standards generally use metric-sized parts of varying quality. Bottom Line: Squier uses inferior parts generally speaking. Due to differences in measurements, upgrading stock parts may not be as simple as it seems. Pickups, like parts, are generally where you can hear the biggest difference between these two lines with Squier generally using lower-quality pickups.
Some of the single-coils are made with bar magnets instead of pole magnets, for example, making the sound fundamentally different from the classic Fender design.
Bar magnet single-coils are more similar in construction to P90s than Fender single-coils and lack the clarity of traditional Fender single-coils. Many of the humbuckers used in Squier instruments are ceramic-magnet-based, with more emphasis on output than tonal clarity. The Fender Standard series has upgraded pickups, but again, are generally considered inferior to USA models.
Different styles with each model also features a different set of pickups. Because the Standard pickups are considered to be of decent quality, this all comes down to your personal taste.
Many players choose only to upgrade one or two of the pickups in a Fender Standard model which is also an option for any Squier. Bottom Line: Pickups, like hardware, will be superior on Fender-branded guitars out of the box. You can, however, always upgrade pickups to whatever higher-end option you prefer. Fit and finish can be very model-dependent across all price points. Vintage-style Squiers have glossy necks and bodies, while more modern or low-end models tend to have a satin neck.
From recent personal experience, the satin neck finish on some Squiers was too rough for my taste, but this is a personal preference. The glossy urethane finish on most of these models tends to be quite thick, which is off-putting to many players. Fret finishing on many Squiers—especially the lower-priced models—is consistently less precise than on more expensive models, fret ends are not as neatly rounded, and frets are less polished. For the Fender Standard line, I have found that finish is thinner and with fewer imperfections than Squier, especially in key areas such as the neck pocket and neck.
The satin finish necks also feel smoother in the hand. Fretting is also generally taken to a higher stage of buffing, and fret ends are much more extensively treated—although, generally, not to the same level of USA models. From my personal experience, I have found that the MIM models tend to weigh less than the Squier models. Long Term Cost and Value For nearly all guitars, there will be a cost to upkeep and to upgrade. Initially, the long-term cost of a Squier will be more, as more elements will be in line for replacement, such as pickups, tuners, and most metal parts.
Also, a setup and fret-dressing will be needed in most cases for the instrument to play optimally. When owning a Squier long-term, unless you love the model as is, you are paying for the wood, paint, and shape, and one can easily spend more in upgrades than on the entire cost of the base instrument. That said, models from the Fender Standard Series are generally more playable right out of the box. Setup and minimal fretwork will be needed, but often, not to the extent that a Squier model would require.
Also, the stock hardware and pickups will have a longer life and may not need replacement at all. As stated previously, many only choose to upgrade some of the pickups in these models. The higher quality parts and build will allow the instrument to age better and let one be more selective on what to change and keep.
The initial cost will be higher, but the long-term cost will be lower. What's new New posts New media New media comments Latest activity. Media New media New comments Search media. Merch Shop. Members Current visitors. Log in Register. Search only containers. Search titles only. Search Advanced search…. New posts. Search forums. Log in. Change style.
Contact us. Close Menu. Click Here. JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding. What type of wood is this Squier? Thread starter Stevocaster Start date May 5, Stevocaster Member.
0コメント